Suitable for Full, Random & Nil Exposure
Smooth ground and finished with an Acrylic / Polyurethane or Epoxy coating
Grind and Seal is machine grinding to the desired exposure followed by a Surface Sealer in either Acrylic, Epoxy or Polyurethane to give the concrete a matt, satin or gloss look. A non-slip option is also available for outdoor concrete surfaces where slippage is a problem, for example ramps, walkways and alfresco areas.
PROCEDURE
- Grind with 30 grit to desired exposure.
- Grind with 60 grit to remove scratches.
- Grind with 120 grit to further remove scratches.
- Thorough clean.
- Apply at least two coats of sealer.
- Some concrete when ground requires grouting to fill up holes and imperfections in the surface. This can result in an overall better look, but is up to the client’s discretion.
MAINTENANCE
May require recoating in 4-5 years time depending on whether it is in a high traffic area.